FANDOM


Architect's Scale Rule 20120615 JSCC

An architect's scale rule. Josiah Carberry Collection.

A scale rule is a specialized ruler, used in creating and reading draftings and other scale drawings. Two common styles are available: architect's and engineer's. Specialty scale rules are also available, such as those with scales specific to model railroading. Often, each edge of the rule carries two scales, one twice the scale of the other, and read from opposite ends of the rule.

While many scale rules are flat, appearing at quick glance like a standard rule (ruler), those with a triangular cross section allow the inclusion of more scales.

Architect'sEdit

An architect's scale rule is marked with the scales most commonly used in architecture: 3, 1-1/2, 1, 3/4, 1/2, 3/8, 1/4, 3/16, 1/8, and 3/32

Engineer'sEdit

An engineer's scale rule is marked with the scales most common in engineering drawings:

Reading a scale ruleEdit

Regardless of the type and scale, reading a scale rule is done the same way.

Ad blocker interference detected!


Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.